RCA J27F636 manual Energy Saver

		Connections & Setup
	Switched	The TV can be turned on or off; Sleep Timer, Schedule and Energy Saver can be enabled. This is the default setting.
Energy Saver		When enabled, this feature turns the TV off after a specified period of inactivity (no remote or front panel button presses).

You can toggle between Disabled,  2-hour, 1-hour, and 30-minute settings. Disabled is the default setting. If TV Power is set to On Always, Energy Saver settings are ignored. A warning message will be displayed prior to the TV shutting off.

Front Panel  This setting determines whether the front panel buttons are active (able to be used to control the TV) or not.

Note: When Front Panel is set to Disabled, the MENU button on the master remote turns on the TV.

Parental Controls  This feature determines the amount of access basic users have to Parental Controls. Blocking age-based rating and content themes is described in Chapter 3. Choose between:

Basic & Password  Basic users are able to enter the Parental Control menu and change the password. Basic users can watch blocked programming by entering the system password. This is the default setting.

Basic  Basic users are able to enter the Parental Control menu but cannot change the password. Basic users can watch blocked programming by entering the system password.

No Basic  Parental Control does not appear on the basic Main menu. Basic users can watch blocked programming by entering the system password.

If Parental Controls is set to No Basic, Movie Rating Access, TV Rating Access, Unrated Program Block, and Channel Block will not be available to basic users, regardless of what those items have been set to individually in the Parental Controls menu.

Minimum Standby Power  When enabled, keeps power consumption levels compliant with ENERGY STAR® guidelines. The TV is shipped with this enabled.

Note: Min Stby Power must be disabled to use the DSCI port.

Legacy Mode  When turned On, allows the TV to work with earlier DSCI versions. Thus making the set usable with older DSCI systems. Off is the default setting.

Info Menu  Allows the Master user to set whether the channel information is displayed when the INFO button is pressed on the remote.

Channel Guide  Allows the Master user to determine whether the Channel Guide is displayed by pressing the GUIDE button on the remote. The default is On.

Ignore PSIP  When enabled, Digital Tuning ignores all PSIP data including virtual channel remapping. This allows the DSCI device to tune channels by the physical frequency. This option should be activated (the box has a check mark) when a DSCI device is attached.

Note: Your digital channel lists can be cleared when you change the Ignore PSIP status. Perform a digital channel search after changing this option.

Chapter 1 13