Volume, Power Management | RCA J42LE840 specification

Volume

-Initial Volume : This setting configures the turn on volume of the TV.

-Min Volume : This setting assigns the minimum volume level that the user can access.

-Max Volume : This setting assigns the maximum volume level that the user can access.

-Volume Hold : If this function is on then user cannot adjust volume level

-Blank and Mute : If this function is on, sound will be muted when video is not present on the external video source.

-CH Hold : If this function is on then TV will turn off when CH key is held for 4 seconds on an analog pillow speaker.

-Power Off in Channel List : If this function is on then TV will turn off when CH+ key is pressed on last channel.

-Pillow Initial Volume : TV is configured to Initial Volume when TV is in pillow speaker mode.

-Pillow Min Volume : TV limit minimum volume when TV is in pillow speaker mode.

-Pillow Max Volume : TV limit maximum volume when TV is in pillow speaker mode.

-Auto Power On : This function sets the power state when AC power is applied to the TV.

+Off : TV will go to stanby mode

+On : TV will turn on

+Last : TV will resume the state it was in before AC power was removed.

-Auto Power Off : This function assigns the amount of time an inactive TV will remain on. It can be used by your facility to save energy.

-Power Always : If Power Always menu is on, TV can not be turned off.

-No Signal Power Off : If there is no signal on the TV for 15 minutes or more, this function turns off the TV automatically.

Chapter 4