RCA J42LE840 VCR Connection, When connecting with an antenna, When connecting with an RCA cable

Chapter 1: Connections and Setup

VCR Connection

- To avoid picture noise (interference), leave an adequate distance between the TV and the VCR.

AWhen connecting with an antenna

VCR

ANT IN
	(R) AUDIO (L) VIDEO
ANT OUT S-VIDEO	OUT
	IN

1.Connect the Antenna out socket of the VCR to the Antenna input socket on the TV.

2.Power up the VCR and Television.

3.Tune the TV to the channel output by the VCR. (typically ch.3 or 4.)

4.Refer to the VCR manual for operating instruc- tions.

Rear panel of the set

AWhen connecting with an RCA cable

ANT IN			VCR
		VIDEO	(L) AUDIO (R)
ANT OUT	S-VIDEO	OUT
	OUTPUT
	SWITCH	IN

Side panel of the set

Rear panel of the set

1.Connect the AUDIO/VIDEO port between TV and VCR. Match the jack colors (Video = yellow, Audio Left = white, and Audio Right = red)

2.Insert a video tape into the VCR and press PLAY on the VCR.

3.Select the AV1 or AV2 input source using the INPUT button on the remote control.

4.Refer to the VCR manual for operating instruc- tions.

Chapter 1 17