RCA J42LE840 manual Commercial Interface Menus, Source

Chapter 4: Commercial Interface Menus

OSD

Commercial Interface		On	F G
Clone Management			G
Channel			G
OSD			G
Source			G
Volume			G
Pillow Speaker			G
Power Management			G
Key Management			G
Reset Commercial Interface			G
D E Move	G Select	Menu Exit

Channel Banner		On	F G
OSD Timer		60Sec	G
Clear V-Chip			F G
Auto Clear V-Chip		Off	F G
Power On CC		Off	F G
Basic Menu		Off	F G
Splash Screen		Off	F G
D E Move	F G Select	Menu Exit

-Channel Banner : If this function is off then channel banner will not appear when channel is changed.

-OSD Timer : Use this setting to configure the menu OSD time out.

-Clear V-Chip : This function can be used to Clear V-Chip password and settings.

-Auto Clear V-Chip : This function can be used to clear VChip settings when setting time is spent .

-Power On CC : This function sets the default Closed Caption mode when the TV is turned on.

-Basic Menu : This feature is for setting whether to use menu button of Guest RCU or not.

-Splash Screen :This feature is for setting whether to display logo image or not. This feature enables / disables the guest menu.

This feature enables / disables the splash image when the TV is turned on

Source

Input Block			G
SI Vendor Select		FTG	F G
RS232 Function		On	F G
Map DVD Buttons			G
Auto Side AV		On	F G
D E Move	G Select	Menu Back

TV	Off	F G
AV1	Off	F G
AV2	Off	F G
COMPONENT	Off	F G
PC	Off	F G
HDMI1	Off	F G
HDMI2	Off	F G
D E Move F G Adjust	Menu Back

-Input Block : Use this setting to configure which inputs are available to the user through the input button.

-SI Vendor Select : Use this setting to select the contents delivery method of the service provider.

-RS232 Function : This function is something to control DVD Player or TV by RS232 communication.

Input Block			G
SI Vendor Select		FTG	F G
RS232 Function		On	F G
Map DVD Buttons			G
Auto Side AV		On	F G
D E Move	G Select	Menu Back

Play.Pause	None	F G
Next	None	F G
Previous	None	F G
Fast Forward	None	F G
Reverse	None	F G
Disk Menu	None	F G
Menu Up	None	F G
Menu Down	None	F G
Menu Left	None	F G
Menu Right	None	F G
Menu OK	None	F G
D E Move F G Adjust	Menu Back

-Map DVD Buttons : Use this setting to configure the RCU buttons for controlling the DVD Player.

-Auto Side AV : Use this setting to change the input source to the Side AV automatically when Side AV Signal is received.

Chapter 4 31