Casio DT-X5 Series manual Connecting the AC Adaptor for Cradle-type Battery Charger

Connecting the AC Adaptor for Cradle-type Battery Charger

Use the special AC adaptor (sold separately) for the Cradle-type Battery Charger to connect to a wall outlet.

1.After making sure that the Cradle-type Battery Charger power switch is turned off, plug the AC adaptor into the AC adaptor jack on the back of the charger.

2.Next, plug the AC adaptor into a power outlet.

3.Turn on the power. This causes the Cradle-type Battery Charger power indicator lamp to light in red.

4.Making sure that their power contacts come into contact with each other, place the Handheld Terminal onto the Cradle- type Battery Charger. This causes the Cradle-type Battery Charger power indicator lamp to light in green.

When charging is initiated, Indicator 1 on the Handheld Terminal lights up in red. When charging has been completed, Indicator 1 changes color from red to green.

Power switch (OFF)

Power contacts

Power switch (ON)

POWER

Power Indicator Lamp

Important !

Take care to avoid allowing the Cradle-type Battery Charger power contacts to become connected to each other, which creates a short.

Shorting the power contacts can damage the Cradle-type Battery Charger.

E-61

DT-X5_E_P59_69.p65 61 04.7.14, 6:05 PM