Using the Bridge Satellite Cradle
Configuring DIP Switch Settings (HA-A61IO)
Dismounting the bottom cover of the Bridge Satellite Cradle exposes the DIP switches. You can change the ON/OFF settings of the DIP switches to set the configuration. Please set after first switching OFF the power.
1 2 3 4 5 6 7 8
Not used (Always off)
Not used (Always off)
Host Computer Interface
Setting
USB
6
OFF
ON
*
Daisy Chain
Setting | 5 |
Intermediate Unit | OFF |
Daisy Chain Disabled/Termination | ON |
*
Connection Type
Setting | 3 | 4 | * |
Host Computer | OFF | OFF | |
Daisy Chain | ON | OFF |
|
Bridge Satellite Cradle Data Rate
Setting | 1 | 2 | * |
115,200bps | ON | OFF | |
*Initial factory default setting |
|
|
|
Important!
Note that other DIP settings are used for testing and inspection purposes. Because of this, you should never use any DIP settings other than those described above.
| 54 | 04.7.14, 6:05 PM |
