Manuals / Brands / Communications / Cordless Telephone / Casio / Communications / Cordless Telephone

Casio DT-X5 Series Bridge Satellite Cradle (HA-A61IO)/Bridge Basic Cradle (HA-A60IO) Specifications

1 73

Download 73 pages, 1.97 Mb

E-58

Using the Bridge Satellite Cradle (HA-A61IO)/Bridge Basic Cradle (HA-A60IO)

Bridge Satellite Cradle (HA-A61IO)/Bridge Basic Cradle(HA-A60IO) Specifications

1. IR Communication

Interface: IR interface

Protocol: IrDA Ver. 1.1 Standard

Synchronization: Asynchronous, frame synchronization

Transfer Rate: 9,600, 115,200, 4Mbps

(4Mbps is possible during a USB connection with the host

computer only.)

2. USB

Protocol: USB Ver1.1 Standard

Transfer Rate: 12Mbps (max.)

3. RS-232C (HA-A61IO)

Protocol: Full duplex

Synchronization: Asynchronous

Transfer Rate: 115,200bps

4. RS-422 (HA-A61IO)

Protocol: Full duplex

Synchronization: Asynchronous

Transfer Rate: 115,200bps

5. Charging

Charging System: Fixed-voltage (with current limiter)

Charge Time: Approximately 5.0 hours (standard battery pack)

Approximately 10 hours (large-capacity battery pack)

6. Power Supply

Power Requirement: AC adaptor (AD-S42120A)

Power Consumption: DC12V approximately 1.0A (HA-A60IO)

DC12V approximately 0.9A (HA-A61IO)

Output to Handheld Terminal: DC5V 1.5A (max.)

7. AC Adaptor

Model: AD-S42120A

Input: 100V to 240V AC 50/60Hz

Output: 12V DC 3.5A

8. Dimensions and Weight

Dimensions:

Desktop: Approximately 110(W) × 125(D) × 128(H) mm

(43⁄8"W × 415⁄16"D × 51⁄16"H)

Wall Mount: Approximately 110(W) × 148(D) × 153(H) mm

(43⁄8"W × 57⁄8"D × 6"H)

Weight: Desktop:Approximately 520g (18.34oz) (HA-A60IO)

Approximately 530g (18.7oz) (HA-A61IO)

Wall Mount:Approximately 610g (21.52oz) (HA-A60IO)

Approximately 620g (21.87oz) (HA-A61IO)

9. Operating Environment

Temperature: 0°C to 40°C (32°F to 104°F)

Humidity: 30% to 80% RH (non-condensation)

DT-X5_E_P49_58.p65 04.7.14, 6:05 PM58

Contents

Main Handheld Terminal Series Users Guide PN410388-002 Page Safety Precautions Page Page E-4 Operation of Wireless Data Communication Function Interference with the Operation of Other Equipment (Using Wireless Data Communication Function) E-5 Alkaline Battery Handling Precautions Danger E-6 E-7 Optional Lithium-ion Battery Pack Danger E-8 E-9 AC Power Supply Page E-11 Operating Precautions E-12 Important Warranty and After Service E-13 NOTICE FCC WARNING Peripherals and Cables E-14 certify and declare under our sole responsibility that the following equipments: Important We, the undersigned. E-15 E-16 Contents E-17 E-18 Before Getting Started When unpacking, make sure that all items are included. E-19 Install the main battery When Using the AA size Alkaline Batteries (DT-X5M10E/DT-X5M30E/ DT-X5M30U only) E-20 When Using the Battery Pack E-21 Turning On the Power Handheld Terminal System Configuration Page Page E-25 General Guide E-26 E-27 Replacing the Battery This guide uses the following terms to refer to the batteries. Replacing the Battery Pack Always keep backup copies of all important data! E-28 Replacing the AA size Alkaline Batteries (DT-X5M10E/DT-X5M30E/ DT-X5M30U only) E-29 To replace the battery pack E-30 Page E-32 Removing and Installing the Alkaline Battery Holder (DT-X5M10E/DT-X5M30E/DT-X5M30U only) Removal Procedure E-33 Installation Procedure Attaching the Wrist Strap E-35 Configuring Handheld Terminal Settings Adjusting Display Contrast Turning Backlight On and Off E-36 Using the Laser Scanner (DT-X5M10E/DT-X5M10R only) E-37 Warning Label Warning! Never look directly into the laser light. Bar Code Scanning Position Margin Margin Good Good Good Bad Bad Bad Bad E-38 Using the C-MOS Imager (DT-X5M30E/DT-X5M30R/DT-X5M30U/DT-X5M30UR only) Warning Label E-40 Adjusting Laser Emission Width (DT-X5M10/DT-X5M10R only) Page E-42 Performing Communication IR Communication E-43 BluetoothTM Communication E-44 Resetting the Handheld Terminal Reset and Full Reset (Memory Initialization) Reset Performing a Full Reset (Initialization) To perform a reset To perform a full reset E-46 DT-X5 Specifications E-47 E-48 E-49 Using the Bridge Satellite Cradle (HA-A61IO)/ Bridge Basic Cradle (HA-A60IO) E-50 E-51 Connecting the AC Adaptor and Connecting to Computer E-52 E-53 Removing the Fall Protector E-54 Using the Bridge Satellite Cradle (HA-A61IO)/Bridge Basic Cradle (HA-A60IO) Configuring DIP Switch Settings (HA-A61IO) Not used (Always off) Not used (Always off) Host Computer Interface Daisy Chain Connection Type Bridge Satellite Cradle Data Rate E-55 Using Wall Mount Unit Page E-57 Connecting Multiple Bridge Satellite Cradles (HA-A61IO) E-58 Bridge Satellite Cradle (HA-A61IO)/Bridge Basic Cradle (HA-A60IO) Specifications E-59 Using the Cradle-type Battery Charger E-60 E-61 Connecting the AC Adaptor for Cradle-type Battery Charger Important ! E-62 Using Wall Mount Unit Removing the Fall Protector Cradle-type Battery Charger (HA-A30CHG) Specifications E-63 Using the Dual Battery Charger E-64 Page E-66 Connecting Multiple Dual Battery Chargers E-67 Dual Battery Charger (DT-5022CHG) Specifications E-68 Using Rechargeable Battery Pack Battery Pack Specifications Large-capacity Battery Pack Specifications