Topcon A3280 installation manual Weather Station Operation/Installation Manual

Weather Station Operation/Installation Manual

19.The A1953 (Figure 5-1 on page 5-1) may be required if the X20 console’s switched power connector is already used. This provides 12 Volts to the Weather Station when the X20 console is switched ON

20.Use the cable ties (Y216) provided, to keep the harness out of the way. Do not cable tie the A3372 harness too tightly

21.Make sure the Weather Station Dash Label (W156) is on the dashboard of the vehicle the Weather Station is attached to (in the operator’s line of vision), to alert the operator that the Weather Station is mounted on the vehicle’s roof.

This completes the hardware installation of the Weather Station.

A3280 Rev 1.2 6-5