Casio DT-X5 Series manual Using Wall Mount Unit, 2mm 1/8

Using Wall Mount Unit

The following procedure explains how to use the optional wall mount unit (DT-891WH) to configure the Bridge Satellite Cradle/Bridge Basic Cradle for a wall-mounted configuration.

Important!

When mounting on a wall, always make sure to attach the Fall Protector.

1.Remove the screws on the bottom of the Bridge Satellite Cradle/Bridge Basic Cradle, and remove the desktop unit.

Screws

2.Affix the wall mount unit to the bottom of the Bridge Satellite Cradle/Bridge Basic Cradle, and secure it in place with the wall mount unit screws.

3.Drive one of the provided screws into the wall at the location where the upper hole of the wall mount unit to be when you mount the unit on the wall.

Do not drive the screw into the wall all the way. Keep a space of about 2mm (1/8") between the head of the screw and the wall surface.

Screws

2mm (1/8")

E-55

DT-X5_E_P49_58.p65 55 04.7.27, 3:31 PM