Installation Procedure
When using AA size alkaline batteries, install the alkaline battery holder according to the following procedure.
1.Make sure the Handheld Terminal is turned off. If the power is on, press the power key to turn it off.
2.Turn over the Handheld Terminal.
3.Slide the two main battery cover lock switches on both sides of the Handheld Terminal to the “FREE” position, and remove the main battery cover.
If the battery pack is installed, remove the battery pack by referring to step 4 describing “To replace the battery pack” on page 30.
4.Install the alkaline battery holder as shown in the illustration.
Fold the battery pack removal tape so that it is beneath the alkaline battery holder.
2 |
1 |
1 |
1 | 2 |
| 33 | 04.7.14, 6:03 PM |
