Casio DT-X5 Series manual Port requires installation of a special driver on the PC

Using the Bridge Satellite Cradle (HA-A61IO)/Bridge Basic Cradle (HA-A60IO)

1	USB Port	This port accepts connection of a USB cable for connection to a
		computer for transfer of system data and file data. Use of the USB
		port requires installation of a special driver on the PC.
2	RS-232C Port	This port accepts connection of an RS-232C cable for connection
	(HA-A61IO only)	to a computer for transfer of system data and file data. Use of the
		RS-232C port requires installation of a special driver on the PC.
3	RS-422C Port	This port is used when connecting to another Bridge Satellite
	(HA-A61IO only)	Cradle.
4	AC Adaptor Jack	Connect the AC adaptor sold separately to supply power.
5	Wall Mount Unit	The holes in this plate accept screws that secure the wall mount
	Fastening Plate	unit in place.
6	Terminal Detect	This switch detects when the Handheld Terminal is not seated
	Switch	correctly on the Bridge Satellite Cradle.
7	IR Port	This port transfers data with the Handheld Terminal IR port non-
		contact data communication.
8	Power Contacts	Power is supplied to the Handheld Terminal via these contacts.
9	Power Indicator	This lamp indicates the Power Status and the mounting status of
	Lamp	the Handheld Terminal.
		Off: Power off
		Green: Power on, Handheld Terminal mounted correctly
		Red: Power on, Handheld Terminal not mounted
10	Communication	This lamp shows when the Handheld Terminal is performing data
	Indicator Lamp	communication.
	(HA-A61IO only)	Off: No data communication being performed
		Green flashing: Data communication in progress
		Red: Problem with a connection between two Bridge Satellite
		Cradles
11	System Status	This lamp indicates whether the system is operating normally.
	Indicator Lamp	Regardless of whether or not a Handheld Terminal is mounted
		this lamp indicates the system status and whether or not a
		communication operation with the system can be performed.
		Off: System is not operating.
		Green: System is operating.
12	Power Switch	Turns the power on and off.
13	Desktop Unit	This is the base when using the Bridge Satellite Cradle/Bridge
		Basic Cradle in a desktop configuration. Remove the desktop unit
		in the case of a wall-mount configuration.
14	DIP Switches	Use these switches to configure the Bridge Satellite Cradle as
	(HA-A61IO only)	required.
15	Fall Protector	This is a removable attachment that prevents the Handheld
		Terminal from tipping over and falling.

E-50

DT-X5_E_P49_58.p65 50 04.7.14, 6:05 PM