RCA L15D20 manual Connections and Setup, Attaching Your TV’s Base, Mounting Your TV to the Wall

Models: L15D20

1 36
Download 36 pages 56.9 Kb
Page 7
Image 7

Connections and Setup

Attaching Your TV’s Base

Your TV comes shipped without the base attached so that you can choose to mount your TV either to its base or to a wall (wall mount sold separately). If you want to mount your TV to the wall, don’t attach the base and instead follow the Mounting Your TV to the Wall instructions below.

1. Locate the base. For model L19WD20, also locate the three screws.

2. For model L15D20, pick up the TV and align it so that the lock tab on the base matches with the tab opening on the back of the TV.

Model L15D20

Model L19WD20

For model L19WD20, the screw holes underneath the TV match with the screw holes inside the base.

Push down on the top of the TV until it clicks into the base.

3. For model L19WD20, attach the three screws to the bottom of the base as the picture to the left shows.

Model L19WD20 bottom of the base

Model L15D20 tab

Model L19WD20 tabs

Remove the screws that attach to the TV's base attachment.

Mounting Your TV to the Wall

Caution: The wall mount must bear a minimum of five times the TV’s net weight without causing damage.

To mount your TV to the wall you need to purchase a VESA wall mount. Purchase a VESA 100 x 100, M4 x 10mm (100 x 100 means the mounting measurements are 100mm horizontally and 100mm vertically; M4 x 10mm is the type of screw).

1.If the base is attached, you need to remove it before attaching the wall mount.

A.Place the TV facedown on a surface that is soft, yet strong enough to hold the TV.

B.For model L15D20, push in on the tab at the back of the base and remove the base from the TV.

For model L19WD20, remove the three screws from the bottom of the base. Then, squeeze the two tabs on the bottom of the base and remove the base from the TV.

C.Use a screwdriver to remove the screws from the holes as the picture indicates to the left. Model L15D20 has three screws; model L19WD20 has four screws.

Wall mount holes

2. Make sure all cables are already connected to the TV.

3. Attach the wall mount to the TV using the four holes on the TV's back panel, as indicated in the picture to the left.

4.Follow the directions included with the wall mount to mount the TV to the wall.

Chapter 1

7

Page 7
Image 7
RCA L15D20 manual Connections and Setup, Attaching Your TV’s Base, Mounting Your TV to the Wall