Connections & Setup
Setting Up Your TV
There are several steps you need to follow before you can turn on the TV. Follow the instructions below to setup and turn on your TV.
Plug in the TV
ON/OFF MENU | VOL | CH |
Plug the end of the cord from the power adapter into the DC POWER IN jack on the bottom panel of the TV. Then connect the end of the power cord into the other end of the power adapter. Plug the end of the power cord into an appropriate wall outlet. Be sure to insert the plug completely. Do not plug into an outlet controlled by a light switch.
Put Batteries in the Remote
•Remove the battery compartment cover from the back of the remote by pushing down on and sliding off the cover.
•Insert 2 fresh “AA” batteries. Make sure the polarities (+ and
•Replace the cover.
Turn on the TV
The first time you turn on your TV you need to turn on the main power to the TV by pressing the Power button on the TV’s front panel. Then press the ON/OFF button on the TV or ON•OFF button on the remote to power on the TV.
Adjust the TV Screen
The TV’s screen is adjustable simply by pushing on the top, front part of the screen, while your other hand holds the base of the TV.
Chapter 1 | Graphics contained within this publication are for representation only. | 9 |
