Removing the Table Stand
Your TV comes with the table stand attached. If you want to mount your TV to the wall, remove the table stand by following the instructions below.
Step 1
Place the plastic bag off the TV and place it on a table or other flat surface. Place the TV set face down on the TV bag.
Step 3 (Only for model L42FHD37R/L46FHD37R)
Attach the stand cap to the TV cabinet.
Step 2
Remove the table stand from the TV cabinet. Use a screwdriver to remove the three M6
1
Step 3 (Only for model L40FHD41)
Attach the stand cap to the TV cabinet using a M4
TV cabinet with stand cap attached. | TV cabinet with stand cap attached. |
Mounting Your TV to the Wall
To mount your TV to the wall, purchase a VESA wall
Models L40FHD41/L42FHD37R/L46FHD37R | Purchase a VESA 600 x400, Size M6 screw | ||
|
|
|
|
The VESA number is the horizontal and vertical measurement of the mounting holes. For example, 600x400 refers to fact that the mounting measurements are 600mm horizontally and 400mm vertically.
Follow the directions included with the wall mount to mount the TV to the wall.
Caution: Your wall mount must be able to bear a minimum of five times the TVÕs net weight to avoid causing damage.
Connections and Setup Chapter 1
7
