Connecting a Component with Composite Video (Good)
To connect a component with a video output jack, such as a DVD player, follow these steps: Example: DVD Player
1.Connect the yellow video cable to the (VID 2) VIDEO jack on the side of the TV and to the video output jack on the DVD player.
2.Connect the red and white audio cables to the (VID 2) right and left audio jacks on the side of the TV and to the audio output jacks on the DVD player.
Composite Video Connection
This is an example of a connection using the composite video jack.
AUDIO/VIDEO
INPUT2 (VID2)
Don’t forget:
If necessary, connect antenna or cable to get a picture. Go to page 8 for instructions.
Red
Yellow
White
COMPOSITE VIDEO CABLES ARE COLOR
RED=RIGHT AUDIO; WHITE=LEFT AUDIO
Connecting a Component with Component Video (Better)
To connect a component that has Y Pb Pr jacks, such as a DVD player, follow these steps: Example: DVD Player
1.Connect three video cables or special Y Pb Pr cables to the COMPONENT INPUT 2 (CMPT 2) Y Pb Pr jacks on the back of the TV and to the Y Pb Pr outputs on the DVD player.
2.Connect your red and white audio cables to the COMPONENT INPUT 2 (CMPT 2) right and left AUDIO jacks on the back of the TV and to the audio output jacks on the DVD player.
10
Chapter 1 Connections and Setup
