RCA MR29410 manual Storing Channels in Memory Automatic Method

1577575A.04 11/15/01 10:32 AM Page 5

O P E R AT I O N

Storing Channels in Memory (Automatic Method)

1

Select the correct signal source (ANT, STD, HRC, IRC). See steps 1~4 on the previous page.

Press MENU•PROG; then

press twice to select “Channel.”

Press to access the

Channel sub-menu.

2

Press to select “Auto program”.

3

Press .

The TV will begin memorizing all of the available channels.

4

After all the available channels are stored, the Auto program menu reappears. Press MENU•PROG twice to exit.

▼ The TV automatically cycles through all of the available channels and stores them in memory. This takes about one to two minutes.

Press MENU•PROG at any time to interrupt the memorization process and return to the Channel menu.

CHAPTER FOUR: TV OPERATION 4.5