RCA MR29410 manual Memorizing the Channels, Selecting the Video Signal-source

1577575A.04 11/15/01 10:32 AM Page 4

O P E R AT I O N

Memorizing the Channels

Your TV can memorize and store all of the available channels for both “off-air” (anten- na) and cable channels. After the available channels are memorized, use the CHAN ▲ and CHAN ▼ buttons to scan through the channels. This eliminates the need to change channels by entering the channel digits. There are three steps for memorizing channels: selecting a broadcast source, memorizing the channels (automatic) and adding and deleting channels (manual).

Selecting the Video Signal-source

Before your television can begin memorizing the available channels, you must specify the type of signal source that is connected to the TV (i.e., an antenna or a cable system).

1

Press MENU•PROG to

display the menu.

2

Press two times to

select “Channel.”

3

Press .

The first line of the Channel menu is highlighted.

4

Repeatedly press	to
cycle through the
following choices:
ANT (antenna)

STD, HRC or IRC (all cable TV)

Note: STD, HRC and IRC identify various types of cable TV systems. Contact your local cable company to identify the type of cable system that exists in your particular area.

At this point the signal source has been selected. Proceed to “Storing

Channels in Memory” (next page).

4.4 CHAPTER FOUR: TV OPERATION