CONNECTIONS & SETUP
SET TIME
: AM
Enter01to12forthehour.
Press OK to exit.
4.Use the left and right arrows to point to the hour and minutes spaces. Use the up and down arrows to scroll through the numbers and change from AM to PM. Press OK to exit.
AUTO CHANNEL SEARCH
The next step of the setup routine “autoprograms” channels into the channel list.
1.Press MENU bring up the Main menu and then select Channel.
TV MAIN MENU
1 Audio
2 Picture Quality
3Screen
4 Channel
5 Time
6 Parental Controls
7 Setup
0 Go Back
2.From the CHANNEL menu (shown below), select Auto Channel Search.
CHANNEL
1 Signal Type
2 Auto Channel Search
3 List and Labels
4 Auto Tuning
0 Exit
The monitor will begin searching for channels and give you a progress report. When the channel search is complete, press OK on the remote to go back to the Channel menu.
20
