Using On-screen Menus
This remote cannot access every menu system of all models and brands of consumer electronics components. However, if you’ve successfully programmed the DVD•AUX key to operate a DVD player, you can access DVD disc menus with the MENU key.
The MENU key will also access TV menu systems for most RCA, GE and PROSCAN TVs, as well as some other popular brands. Also, some RCA VCR menus are supported by this remote’s menu key. This remote also supports select satellite receiver menus.
If this remote’s MENU key doesn’t access the menu system for your component, you’ll need to use the original remote to change menu settings.
Note: This remote’s MENU key doesn’t support cable box menu systems and some VCR menu systems.
Accessing a Menu System
1.Make sure your components are turned on and your TV
is set to the component's input.
2. Press the component key on the remote (TV, VCR, DVD•AUX, or DBS•CABLE) The chosen component key will blink once.
3. Press the MENU key. The chosen
MENU
component key blinks continuously to indicate the remote is in Menu Mode and the component’s menu should appear on the TV screen.
Highlighting and Selecting Menu Items
To navigate
VOL UP/DOWN keys move the cursor (or the highlight) right/left. CHAN UP/DOWN keys move the cursor (or the highlight) up/down.
For RCA, GE or PROSCAN products, press the MENU or ENTER key to select the highlighted item. If menu items have numbers next to them, you can use the number keys to select an item. Additionally, the ENTER key can be used to select menu choices.
For Sony products, pressing the ENTER key while in Menu Mode returns you to the previous menu.
This is an example of a DVD disc
To highlight another language, you would press the CHAN DOWN key (In the example above, the highlight would move to Español).
12
