RCA RCU450, pp18l manual Program for TV Direct Entry Method, CODE SEARCH key

Program for TV—

Direct Entry Method

In order for the four component universal remote to control your TV, you must program it with the TV code that matches your TV. These instructions explain the preferred method of programming the remote—the Direct Entry method.

CODE

SEARCH

1 2 3

4 5 6

7 8 9

0

ON•OFF

TV CODE

1.Manually turn on the TV.

2.Locate the enclosed TV Code List. Find your brand of TV.

Note: If your brand isn’t listed,

use one of the Code Search methods to program this remote control (See Code Search on page 9).

3.Press and hold the CODE SEARCH key for approximately three seconds until all four component keys light up. Then release the

CODE SEARCH key.

4.Press and release the TV key. The TV key remains lit.

5.Use the number keys to enter

the first code listed for your brand.

After you enter a valid 3-digit code, the component key light turns off.

Note: If you enter an invalid code, the lighted component key will flash rapidly. Start over at step 3.

6.Aim the remote at your TV and press the ON•OFF key. If your TV turns off, you have found the correct code.

7.Enter the code in the box provided on this page for future reference.

8.If your TV doesn’t turn off, repeat steps 3-6 above, entering the next code for your brand.

If none of the codes work or your brand is not listed, use one of the Code Search methods to program this remote (See Code Search on page 9).

For a description of each key on the remote control, refer to the Key Descriptions section on page 3-4.

5