RCA pp18l, RCU450 manual Code Retrieval, Auto Code Search, Tv , Vcr , Dbs Cable

Auto Code Search

CODE	1.	Manually turn on the component
SEARCH		you want the remote to operate.
	2.	Press and hold the CODE SEARCH
		key for approximately three seconds
		until all four component keys light up.
		Then release the CODE SEARCH key.

3.Press and release the component key that corresponds to the component

	you want the remote to operate (TV,
	VCR, or DBS•CABLE). The chosen
	component key remains lit.
	Note: For DVD or AUX, press
	DVD•AUX, then the component key
	corresponding to the component
	to be stored under the AUX key. For
	DVD, press DVD•AUX, then the VCR
	key. For an auxiliary component,
	press DVD•AUX, then the
	corresponding component key
	(TV, VCR, DBS•CABLE).
ON•OFF	4. Aim the remote at the component
	and press the ON•OFF key once.
	The remote automatically sends every
	code for the specified component
	one at a time, with a three second
	delay between each code. The lighted
	component key blinks each time a
	new code is sent. Keep the remote
	aimed at the component throughout
	the process.
	5. As soon as the component turns
ENTER	off, you must press the ENTER key
	immediately so the remote stores the
	correct code. The lighted component
	key then turns off. If you don’t press
	ENTER within three seconds, the
	remote will send the next code in the
	list, and you will have to start over
	from step 2.

6.Use Code Retrieval to identify the code for your component for future reference.

Code Retrieval

If you used one of the Code Search methods to program your remote, follow the steps below to find out which code is compatible with your component. Finding the actual code and writing it down will save you time if you ever need to program the remote again (e.g., if programming is lost when you change the batteries).

1.Press and hold the CODE SEARCH key for approximately three seconds

CODE		until all four component keys light up.
SEARCH
		Then release the CODE SEARCH key.
		2. Press and release the component
DBS•		key that matches the component’s
DVD•AUX CABLE VCR	TV	code you are retrieving (TV, VCR, or
		DBS•CABLE). The chosen
		component key remains lit.

10