RCU600BL_IB.qxd 10/17/03 8:09 Page 11
Code Retrieval
If you used one of the Code Search methods to program your remote, follow the steps below to find out which code is compatible with your component. Finding the actual code and writing it down will save you time if you ever need to program the remote again (e.g., if programming is lost when you change the batteries).
1.Press and hold the CODE SEARCH key until the indicator light illuminates. Then release the CODE SEARCH key.
2.Press and release the component key that matches the component’s code you are retrieving (TV, VCR, DVD, DBS•SAT, CABLE, AUDIO). The indicator light blinks once and then remains lit.
3.Press and release the CODE SEARCH key. The indicator light turns off.
4.Starting with 0 on the keypad, press the number keys in order
5.The number that causes the indicator light to blink is the first digit of your code.
6.Repeat step 4 until you have retrieved all three numbers of the code.
7.Refer to the code box to write down the code for your component within the Direct Entry section (page
CODE INDICATOR SEARCH LIGHT
(BLINK)
CODE
SEARCH
(OFF)
Sleep Feature
The Sleep feature turns off your TV automatically at a duration you choose from 1 to 99 minutes. To program your remote to control the Sleep feature, follow these steps:
Programming the Sleep Timer
1.Press and hold the SLEEP key until the indicator light illuminates. Release the SLEEP key.
2.Enter time in minutes using the numerical keypad. The indicator light should turn off. (Minute 1 thru 9: press 0 before the actual number. Maximum: 99 minutes).
3.Leave remote aimed at television. (IMPORTANT: The Sleep feature will not work unless remote is left aimed at television.)
INDICATOR
SLEEP LIGHT
Canceling the Sleep Timer
The Sleep Timer program can be cancelled and reset to zero by either of the following:
1. Press and hold the SLEEP key until the indicator light blinks.
OR
2. Press the ON•OFF key, turning the TV off.
SLEEPON•OFF
(BLINK)
11
