RCA RCU600BL On-screen Menus, Accessing a Menu System, Highlighting and Selecting Menu Items

RCU600BL_IB.qxd 10/17/03 8:09 Page 12

On-screen Menus

This remote cannot access every menu system of all models and brands of consumer electronics components. However, if you’ve successfully programmed the DVD•AUX key to operate a DVD player, you can access DVD disc menus with the MENU key.

The MENU key will access TV menu systems for most RCA, GE and PROSCAN TVs, as well as some other popular brands. In addition, some RCA VCR menus are supported by this remote’s MENU key. This remote also supports select SATELLITE receiver menus.

If this remote’s MENU key doesn’t access the menu system for your component, you’ll need to use the original remote to change menu settings.

Note: This remote’s MENU key doesn’t support CABLE box menu systems and some VCR menu systems.

Accessing a Menu System

To access a menu system, follow these steps:

	1.	Make sure your components are turned on and your
		TV is set to the component’s input.
	2.	Press the component key on the remote (TV, DVD,
		DBS•SAT) for the desired menu screen.
MENU•PROG	3.	Press the MENU key.
	4.	The menu for the component you have chosen should
		be visible on your television.

MENU•PROG

SELECT

ENTER

This is an example of a DVD disc on-screen menu. English is the menu choice highlighted. Using this remote control, you would press the SELECT key to choose English.

To highlight another language, press the DOWN ARROW key. (In the example above, the highlight would move to Espanol.)

Highlighting and Selecting Menu Items

To navigate on-screen menus, use the ARROW keys.

Note: For RCA, GE or PROSCAN TVs, press the MENU key to select the highlighted item. If menu items have numbers next to them, you can use the number keys to select an item. Additionally, the SELECT key can be used to select menu choices.

•For users of RCA, GE and PROSCAN DBS products, older DBS models require that the INFO or MENU key on this remote be used to make program selections. Use the SELECT key for making program selections on newer RCA, GE and PROSCAN DBS models.

•For Sony products, pressing the ENTER key while in Menu Mode returns you to the previous menu.

•In some menu systems, you must press the ENTER key to select the highlighted item.

•All functions in competitive models and brands of products may not be fully supported.

•Because of the wide variety of menu formats, some experimenting may be required.

CLEAR

Exiting a Menu System

To exit the Menu Mode, press the CLEAR key. The remote reverts back to its normal operation.

12