RCU600BL_IB.qxd 10/17/03 8:09 Page 7
6.Aim the remote at the component. Press the ON•OFF key. If your DVD/CD system turns off, you have found the correct code.
7.Enter the code in the box provided on this page for future reference.
8.If your DVD/CD system does not turn off, repeat steps
If none of the codes work or your brand is not listed, use one of the Code Search methods to program this remote. (See Code Search section on page 10).
DVD OR CD CODE
Program for SATELLITE—Direct Entry Method
In order for the
it with the code that matches your SATELLITE receiver. To program your remote to control your DBS system, follow these steps:
1.Manually turn on the satellite receiver.
2.Locate the enclosed SATELLITE Code List. Find your brand in the SATELLITE Codes.
Note: If your brand isn’t listed, use one of the Code Search methods to program this remote control. (See section on Code Search on page 10).
3.Press and hold the CODE SEARCH key until the indicator light illuminates. Then release the CODE SEARCH key.
4.Press and release the DBS•SAT key. The indicator light blinks and then remains lit.
5.Use the number keys on the remote to enter the first code listed for your brand. After you enter a valid
Note: If you enter an invalid code, the LED flashes rapidly for two seconds. Start over at step 3.
6.Aim the remote at the SATELLITE receiver. Press the ON•OFF key. If your SATELLITE receiver turns off, you have found the correct code.
7.Enter the code in the box provided on this page for future reference.
8.If your SATELLITE receiver does not turn off, repeat steps
If none of the codes work or your brand is not listed, use one of the Code Search methods to program this remote. (See Code Search section on page 10).
CODE INDICATOR SEARCH LIGHT
DBS•SAT (BLINK)
(OFF)
ON•OFF
DBS (SATELLITE) CODE
7
