RCA RCU600RS warranty Sleep Function, Programming With Code Search, Menu Function

Sleep Function

The Sleep Function will turn off your TV automatically after the user programs the time interval from one (1) to ninety-nine (99) minutes.

1. Press and hold the SLEEP button. The	INDICATOR
	LIGHT
INDICATOR LIGHT will stay lit. Release
the SLEEP button.

Programming With Code Search

If your TV, VCR, DBS Satellite System, DVD Player, Cable Box or Audio System does not respond after you have tried all the codes for your brand, or if your brand is not listed, try searching for your code by following the steps below.

1. Manually turn on the device you wish to

program.

2. Enter time in minutes using the numerical key pad. Indicator light will go off.

(Min: 1 minute/keypad entry 0-1)

(Max: 99 minutes/keypad entry 9-9)

3. Leave remote aimed at television.

IMPORTANT: Sleep Feature will not work unless remote is left aimed at television.

To Turn Off The Sleep Timer:

1. Sleep timer program will be cancelled

and reset to zero by either of the

following:

…

ONOFF

(BLINK)

2.	Press and hold CODE SEARCH until the
	INDICATOR LIGHT lights, then release
	CODE SEARCH.
3.	Press and release the device button for the
	device you are programming. The
	INDICATOR LIGHT will blink once,
	then remain lit.
4.	Press and release ON•OFF until your
	device turns off.
	Important: You may have to press
	ON•OFF up to 200 times.

	INDICATOR
	LIGHT
CODE ￿
SEARCH
VCR	TV
	(BLINK)
DVD	DBS¥SAT
AUDIO	CABLE

ONOFF

Press and hold SLEEP button until

INDICATOR LIGHT blinks or press

ON•OFFbutton, turning TV OFF.

Menu Function

5. When your device turns off, press

ENTER, the INDICATOR LIGHT will ENTER turn off.

(OFF)

Identifying Codes From Your Universal Remote

The Menu Function is used to make changes in the selected settings such as setting color, channels, timer, etc. The MENU button invokes TV, DVD and DBS•SAT Modes. Each menu will vary from brand to brand.

If you need to find the three-digit code for your TV, VCR, DBS System, Cable Box or Audio System after your device is set-up use this procedure.

Entering the Menu Mode:	TV
	(BLINK)
1. Push the device button on the remote	DBS¥SAT	DVD
for the desired menu screen.

2. Push the Menu button. This allows you to view the menu of the device chosen. The menu should now be visible on your television.

1.Press and hold CODE SEARCH until the INDICATOR LIGHT lights, then release

CODE SEARCH.

2.Press and release the device button for the code you are retrieving. The Indicator Light will blink once.

	INDICATOR
	LIGHT
CODE ￿
SEARCH
VCR	TV
	(BLINK)
DVD	DBS¥SAT

AUDIO CABLE

3.While in Menu Mode these buttons will function as follows:

Navigation Left/Right buttons will operate as cursor right and left.

Navigation UP/DOWN buttons will operate as cursor up and down.

MENU button applies the highlighted menu item.

SELECT button may also be used to select the menu item, especially in DVD.

Not all functions in competitive models and brands of televisions may be fully supported.

EXITING THE MENU MODE Push the CLEAR key to return to normal operation.

3.Press and release CODE SEARCH. The

INDICATOR LIGHT will turn off.

4.Starting with 0 on the keypad, press the number buttons in order (0-9) until the

INDICATOR LIGHT blinks.

5.The number which causes the indicator light to blink is the first digit of your code.

6.Repeat step 4 until you have retrieved all three numbers in the code.

CODE ￿

SEARCH

(OFF)

…

15 16