Programming With Code Search
If your TV, VCR, or Cable Box does not respond after you have tried all the codes for your brand, or if your brand is not listed, try searching for your code by following the steps below.
1.Turn on the device you wish to program.
2.Press and hold CODE SEARCH until the INDICATOR LIGHT lights, then release CODE SEARCH.
3.Press and release the device button for the device you are programming (TV, VCR or CABLE). The
INDICATOR LIGHT will blink once.
For AUX, press AUX then the device button you are assigning to AUX.
4. Press and release POWER until your device turns off.
Important: You may have to press POWER up to 200 times.
5.When your device turns off, press the ENTER button, the INDICATOR LIGHT will turn off.
Getting Codes From Your Universal Remote
If you need to find the
1.Press and hold CODE SEARCH until the INDICATOR LIGHT lights, then release CODE SEARCH.
2.Press and release the device button for the device’s code you are retrieving (TV, VCR or CABLE). The
INDICATOR LIGHT will blink once.
For AUX, press AUX then the device button for the code you are retrieving.
3. | Press and release CODE SEARCH. The INDICATOR |
|
|
|
|
|
| |
| LIGHT will turn off. |
|
|
|
|
|
| |
|
|
|
|
| OFF |
| ||
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
4. | Starting with 0 on the keypad press the number |
|
|
|
|
|
| |
|
|
|
|
|
| |||
| buttons in order | … |
|
|
|
|
| |
| blinks. |
|
|
|
| |||
|
|
|
| |||||
5.The number which causes the INDICATOR LIGHT to blink is the first digit of your code.
6.Repeat step 4 until you have retrieved all three numbers in the code.
11
