Button Description
ENTER |
| |
Battery Installation | ||
The ENTER button | ||
operates the same as |
| |
Your remote requires four (4) new AAAalkaline | ||
on your original | ||
batteries. To install the batteries: | ||
remote. | ||
1. Turn the remote over and push down on the arrow | ||
| ||
PRE CH | and slide the cover off. | |
2. Insert the batteries, matching the battery to the + | ||
The PRE CH | ||
and - marks inside the battery case. | ||
(Previous Channel) | ||
3. Press the battery cover back into place. | ||
button operates the | ||
Note: Removing the batteries may require you to | ||
same as on your | ||
reprogram the unit. | ||
original remote. | ||
|
VOL & CHAN
The VOL(Volume) and CHAN (Channel) buttons operate the same as on your original remote.
MUTE
The MUTE button operates the same as on your original remote.
POWER
The POWER button operates the same as your original remote (note: some RCA, GE and Proscan models require you to press the device key to turn the device on and the power key to turn the device off).
LIGHTBULB |
|
The LIGHTBULB button is used to |
|
control lighting the keypad and |
|
conserving battery power. Press the |
|
button and hold until the remote |
|
lights up. The remote will then light |
|
at the touch of any button. To turn |
|
off the feature, press the LIGHTBULB | 3 |
button a second time. |
