Programming Your Universal Remote For Cable Box
1.Manually turn on the Cable Box.
2.Press and hold the CODE SEARCH button until the INDICATOR LIGHT lights, then release the
CODE SEARCH button.
3.Press and release the CABLE button
(the INDICATOR LIGHT will blink then remain lit).
4.Find the three digit code for your Cable Box in the code list starting on the following page and enter it
using the Number Buttons.
After your code is entered, the INDICATOR LIGHT will turn off.
5.Aim the remote at your Cable Box and press the POWER button. Your Cable Box should turn off.
BLINK/ON
OFF
Note: If your Cable Box does not respond, try all the codes for your brand. If the codes do not work, or your brand is not listed, try the Code Search method on page 11.
6.With your Cable Box on, press CHANNEL UP. If the Cable Box responds, no further programming is required.
7. Enter your code here for easy reference. |
| CABLE BOX CODE | |||||
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
8
