RP5030 EN(A ver.) 7/3/06 4:56 PM Page 10
Before You Begin
EN
Power supply | Starting up the unit |
This unit can be operated by 2 “AAA” batteries.
Press PLAY to turn on the unit to start playback or recording.
Installing Batteries (not included)
1.Slide the battery compartment door to the bottom and lift up the door to open.
2.Insert 2 “AAA” batteries with polarities matching indications.
3.Replace the battery compartment door.
Refer to the battery level indicator on display for batteries level. Replace
with new batteries when the indicator is empty.
Auto power shut down
The unit will be automatically turned off if left idle for 3 minutes.
Using headphones and external microphone
•When headphones are connected, sound output from speaker will be muted.
•When external microphone is connected, no record can be made from
Shutting down the unit
Press STOP to turn off the unit.
Keys lock
This feature avoids accidental key activation during recording or playback.
1.Slide the 
button upward , LOCKED will be flashed on display. (LOCK icon 
will be shown)
2.Slide the 
button downward to unlock the keys.
Tones
You can activate this
feature so that beepBEEP sound can be heard whenever you press
on any button except during playback and recording.
BEEP
1.Press MENU button repeatedly until TONE shows on display.
2.Press REVERSE or FORWARD to set beep sound ON/ OFF.
3.Press MENU to confirm selection.
5
