| 5/2/01 4:46 PM Page 14 | |
|
|
|
TROUBLESHOOTING
TIPS
EN
|
|
|
|
|
| Problem | Solution | Problem | Solution |
| System will | Check power cord for a secure connection. | CD button | Switch to another function (TAPE, Tuner) |
| not turn on | Unplug the unit for a moment, and then | will not | and then back to CD. |
|
| plug into power source again. | respond, or |
|
|
| Check the outlet by plugging in another | does not |
|
|
| device. | change |
|
|
|
| discs when |
|
| No sound | Increase the volume setting. | you press |
|
|
| Check connection to speakers. | DISC SKIP |
|
|
| Check that you have selected the appropri- |
|
|
|
| ate function: CD, TAPE, Tuner. | Distorted or | Inspect the tape heads, clean and demag- |
|
|
| noisy tape | netize. |
| Poor radio | Check antenna connection. | recordings |
|
| reception | Move antenna. |
|
|
|
| Turn off nearby electrical appliances, such | Remote | Check that the batteries are properly |
|
| as hair dryer, vacuum cleaner, microwave, | control | installed. |
|
| fluorescent lights. | does not | Replace weak batteries. |
|
|
| work | Check the system is plugged in to power |
| CD does | Check that CD is in the tray. |
| source. |
| not play | Check that CD label is facing up. |
| Point the remote directly at the system’s |
|
| Check that PAUSE mode is not on. |
| front panel. |
|
| Check that CD function is selected. |
| Move closer to the system. |
|
| Clean CD lens with RCA lens cleaner. |
| Remove any obstacles between the remote |
|
|
|
| and the system. |
| CD sound | Clean the disc. |
|
|
| skips | Check disc for warping, scratches, or other |
|
|
|
| damage. |
|
|
|
| Check if something is causing the system to |
|
|
|
| vibrate. If so, move the system. |
|
|
|
|
|
|
|
MAINTENANCE
Disconnect the audio system from the power source before performing any maintenance.
Cleaning
Clean the exterior of the system using a soft dust cloth.
CD Player
CAUTION! This system operates with a laser. It must be opened by only a qualified technician.
CD Lens Care
When your CD lens gets dirty it can also cause the
system to output poor sound quality. To clean the lens you will need to purchase a CD lens cleaner which can maintain the output sound quality of your system. For instructions on cleaning the CD lens, refer to the ones accompanying the lens clean- er.
Tape Player
To prevent deterioration of sound quality, periodi- cally open the door of each deck and clean the mag- netic heads, pinch roller, and capstan with a cotton bud dipped in alcohol. Also, demagnetize the head by playing a demagnetizing cassette (available through an audio equipment store).
10
