RCA RTB1100 user manual Overview of Controls

Overview of Controls

OPEN/CLOSE Press to open or close the disc tray.

ON/STANDBY Press to turn on your unit, or put your unit in standby mode. When your unit is in standby mode, power is still entering your unit. To disconnect power, unplug the power cord.

Numbers		In playback mode, press GOTO button, then press
		the number buttons to enter a title, chapter, track,
CLEAR		or time.
		Press to clear an input.
GOTO		Press to search for a title, chapter, track or time.
A(red),		When playing a Blu-ray Disc that has a Java
B(green),		application, press to control playback. For more
C(yellow),		information, see the documentation that came with
D(blue)		the Blu-ray Disc.
VOL+/-		Press to increase or decrease the volume.
MUTE		Press to turn off sound. Press again to turn the
POP UP		sound back on.
		During Blu-ray Disc playback, press to open a menu
		that lets you control Blu-ray Disc playback.
		During DVD playback, press to open the DVD title
SKIP	/	menu (if available).
		Press to go to the next or previous chapter (Blu-ray
		Disc/DVD) or track (CD).
		In tuner mode, press to go to the next higher /lower
REV		preset station.
		Press to fast reverse.
STOP		Press to stop playback.
PLAY/PAUSE		Press to start or pause playback.
FWD		Press to fast forward.
, /TUNE		, Navigatethroughthemenus.Theleftandright arrowsalso
/TUNE	,	tune the radio frequency in the tuner mode.
OK		Confirms your selection.
EXIT		Press to return to the previous menu.
SETUP		Press to access the speaker setting and test tone.
		ToenableordisabletheCenterspeaker/surroundspeakers,
		press this button, and press / buttons to select Center
		SpeakerorSurroundSpeaker,thenuse / buttonson
		the remote control to choose YES or NO.
		To start or end the test tone, press this button, and
		press /	buttons to select TS TONE, then press OK
		button. The audio signal will be sent to a different
		speaker every approximately two seconds; you can
		also use	/ buttons to select the speaker channel
		you wish to test and adjust, you’ll hear a test tone
		coming from the speaker you select, use /
		buttons to adjust the level to your desired setting.
OPTICAL		Press OK button to exit this function.
		Press to select OPTICAL input source.
AUX		Press to select AUX input source.
TUNER		Press to select TUNER mode, and toggle between
		the FM and AM bands.

-12-

English IB(A5).indd 14

4/15/2010 20:19:11