RCA RTB1100 user manual Connecting the Speakers, Insert, Release

Connections and Setup

Connecting the Speakers

Speaker wires are color-coded to match the terminals. Connect the speaker wire from the back of each speaker to the corresponding color terminal at the back of the unit. Press down the tab to open the ter- minal and insert the wire. Release the tab to lock wire in the terminal.

		Front Speakers
	Center Speaker
		Right	Left
Subwoofer	Green and Black
		Red and	White and Black
	Purple and Black	Black

Insert

Press

Release

Gray and Black Blue and Black

Rear Speakers

(Surround Sound)

RightLeft

To adjust each speaker volume level for optimum listening experience.

(1)Press the LEVEL button on the remote control to select FL (front Left speaker).

(2)Press the orbuttons to adjust the value up or down (between -10dB and +10dB).

(3)Repeat step (1) and (2) for the other speakers FR, SL, SR, CT, SW.

Speaker gains may be set to levels of up to +10dB, actual max levels may also depend on your Volume Setting.

Note:

When connecting the speakers, make sure the polarities (“+” speaker wire to “+” on the re- ceiver) of speaker wires and terminals match. For example, red wire to red terminal on the receiver. If the cords are reversed, the sound will be distorted. Do not let the speaker wires touch each other, it will damage the system’s amplifier.

-9-

English IB(A5).indd 11

4/15/2010 20:19:11