![](/images/new-backgrounds/1047611/4761141x1.webp)
The Setup Menu
System Setting
1.In the main menu of Settings, press button, then use
or
button to select System.
Restore factory defaults
If you choose OK in the prompt message box, all settings will be restored to the factory defaults.
Network Setting
Audio
Language
System
Optical Disc AutoPlay | On |
Always Allow Access | |
internal USB (0.0 KB Free) |
1.In the main menu of Settings, press button, then use
or
button to select Network.
2.Press button.
Settings
System
Network
Display
Erase |
|
| |
Update Via Network | Required Storage: 48 MB | ||
Restore factory defaults | Restore factory settings and deactivate | ||
|
|
|
|
Language
System
Settings
Network
Wired
2. Press button and press | or | button to |
select an option, then press OK button. |
Display
Network Test
3. | Press | or | buttons to select the desired |
| option, and then press OK button to confirm | ||
| your selection. |
| |
4. | Press | or EXIT button to go to the previous | |
| menu. |
|
|
Optical Disc AutoPlay
If On is selected, it will load data and play back automatically when you insert a
•Limit Access — Allows Internet access with valid “BDLive” network access approval.
•Always Allow Access — Always allows
•Prohibit Access — Never allows
The available storage space is displayed next to
Erase Blu-ray Storage
If you choose OK to erase
Update Via Network
This option displays the required storage space if the BD player is connected to internet for upgrade.
Audio
3.Press or
button to select Wired, then press OK button. The IP Settings screen appears. If the network connection is active, Link Up appears next to Link Status. If the network connection is not active, Link Down displays next to Link Status.
| IP Settings | |||
Link Status |
| Link Down | ||
MAC Address |
| xx:xx:xx:xx:xx:xx | ||
IP Mode |
| Dynamic | ||
IP Address | 0.0.0.0 | |||
Subnet Mask | 0.0.0.0 | |||
Gateway | 0.0.0.0 | |||
Primary DNS | 0.0.0.0 | |||
Secondary DNS | 0.0.0.0 | |||
|
|
|
|
|
| Apply |
| Cancel |
|
4.Press or
button to select IP Mode, then press OK button.
5.Press or
button to select an IP Mode. You can select:
•Dynamic — Uses DHCP to automatically obtain an IP address.
•Manual — Lets you manually configure network settings, such as IP address, subnet mask, and gateway settings.
•Off — Disables the network interface.
English IB(A5).indd 22
4/15/2010 20:19:13