Connections and Setup
Connecting AUDIO IN from External Sources such as TV
Using AUDIO IN Jacks
Connect the AUDIO IN jacks from the unit to the AUDIO OUT jacks on VCR, TV, SAT/Cable Box or other component. Press either SOURCE button
Connecting your player to a wired router
Connect an Ethernet cable (CAT5 or better with RJ45 connector) to the ETHERNET jack on the back of your player and to an Ethernet jack on a hub or broadband router.
on the main unit or AUX button on the remote control to select AUX mode.
TV | SAT/ |
VCR | Cable Box AUDIO OUT |
OR | OR |
Hub or broadband router
LAN
White |
|
| Audio cable |
Red | (not included) |
LAN cable
(not included)
Digital Optical Input
Connect components capable of outputting Dolby digital (e.g. TV or SAT/Cable Box) or stan- dard PCM (CD) format digital signals. Use a fiber optical cable for this digital audio connection. (Cable not included).
Press OPTICAL button on remote control or SOURCE button on main unit to select OPTICAL for digital audio output components.
Notes: |
•Do not connect a modular phone cable to the ETHERNET jack.
•When plugging or unplugging the cable, hold the connector on the end of the cable. When unplugging, do not pull on the cable. Press down the lock tab and pull the connector out of the jack.
•Because there are various connection configurations, follow the instructions from your telecommunication carrier or Internet service provider.
English IB(A5).indd 10
4/15/2010 20:19:11
