References
Trouble Checks
Sometimes problems can be easily solved by checking a few basic things.
Check below before you call for help or take your TV/VCR to an Authorized
RCA VCR Servicenter.
| Trouble | Here's what to try: |
|
|
|
| No power | • Plug TV/VCR into an operating outlet. |
|
|
|
|
| • Check connections. |
|
|
|
|
|
|
|
|
|
| TV/VCR does not respond to remote | • Aim remote at TV/VCR’s remote sensor with no objects between them. |
|
|
|
|
| • Change batteries. |
|
|
|
|
|
|
|
|
|
| Poor or no picture for normal TV viewing | • Switch to an active channel. |
|
|
|
|
| • Check antenna connections. If using supplied dipole, try adjusting rods. |
|
|
|
|
| • Check video adjustments. See page 8. |
|
|
|
|
| • Make sure the line input is not selected. Select a channel with the CHAN |
|
|
|
|
| buttons. |
|
|
|
|
|
|
|
|
|
| No sound | • Press VOL up to increase sound. |
|
|
|
|
| • Sound has been muted. Press MUTE on remote or VOL up. |
|
|
|
|
|
|
|
|
|
| Snow or streaks in picture or no picture during | • Check tape — it may be worn out or of poor quality. Try another tape. |
|
|
|
| playback | • Some snow/streaks are normal during search and pause. |
|
|
|
|
| • Press one of the TRACK buttons on the remote or CH up or down on the |
|
|
|
|
| TV/VCR to move the streaks up or down and out of the picture. |
|
|
|
|
|
|
|
|
|
|
| • No cassette in TV/VCR. |
|
|
|
| Will not record or play | • Eject and |
|
|
|
|
| • Broken tape — try another cassette. |
|
|
|
|
| • Safety tab removed from cassette — TV/VCR will not record. |
|
|
|
|
| • TV/VCR is in pause mode. Press PAUSE on the remote. |
|
|
|
|
|
|
|
|
|
| Cannot insert or eject tape | • Insert cassette with window facing up and safety tab facing out. |
|
|
|
|
| • To remove cassette, TV/VCR must be connected to working outlet. |
|
|
|
|
| • Turn POWER off and then on before trying to insert or remove cassette. |
|
|
|
|
|
|
|
|
|
| Time counter not working | • Press DISPLAY on remote to display time counter on screen. See page 8. |
|
|
|
|
| • The time counter does not advance during unrecorded portions of tape. |
|
|
|
|
| When an unrecorded segment of tape is encountered, the time counter will |
|
|
|
|
| hold its count until recorded material is detected again. |
|
|
|
|
| • A minus |
|
|
|
|
| back than a counter reading of 0:00:00. |
|
|
|
|
|
|
|
|
|
| Rewind does not operate | • Tape already rewound. |
|
|
|
|
|
|
|
|
|
| Timer recording not made | • Program entered incorrectly (wrong channel or times). |
|
|
|
| or wrong program recorded | • Cable box was not turned on at time recording was to begin. |
|
|
|
|
| • Power interruption. TIMER indicator flashes on front of TV/VCR. |
|
|
|
|
| • Check to see if time and date are correct — including AM/PM. |
|
|
|
|
| • Program exceeded tape’s length or tape was not rewound beforehand. |
|
|
|
|
| • No tape in TV/VCR, or cassette ejected if safety tab broken off. |
|
|
|
|
|
|
|
|
|
26
