Chapter 8
Scenario 2: Business user with TOS marking.
E-NIT-CTC-20041213-0013v0.5 113
Queues As seen in the introduction we will need an overflow of packets in the real time
queue to a lower priority queue (WFQ4)when the EF traffic is exceeding 50% of the
bandwidth.
To do so proceed as followed:
1Go to the IP QoS page and select the Queues tab
Expert mode -> IP Router -> IP QoS
You will now see a list of all queues per PVC.
Since we are using PVC atm_pvc_0_35 to connect to the internet we will have to
enable Propagation for the highest queue of this PVC.
2Check the Propagate checkbox next to queue 5 of atm_pvc_0_35.
3Click Save All to make the changes permanent.
4The last thing that we need to do is bring down the ATM interface in order for
the new parameters to become active. This can be done in two way’s:
By switching the modem off and on again.
By opening the Speedtouch menu on the GUI and selecting RESTART
This will restart the modem without losing the configuration.