Using the Remote Control
Remote Control
Component Buttons
Press one of the buttons to set the remote to operate that component.
POWER
VCR CABLE TV
PAUSE PLAY REC
REW | FF |
CABLE
Used with POWER button to turn on a compatible cable box or satellite receiver as described on page 14.
TV
Turns on a compatible GE, RCA, or ProScan TV and sets the remote to control the TV.
Used with POWER button to turn on another brand of TV as described on page 11.
VCR
Sets the remote to control the VCR.
SLOW•F.ADV STOP SEARCH
VCR Function Buttons
Press VCR to set remote to control the VCR to use the function buttons.
1 | 2 | 3 |
|
| CHAN |
4 | 5 | 6 |
7 | 8 | 9 |
|
| MUTE VOL |
| 0 |
|
INPUT TV•VCR | DISP MENU CLEAR | |
| PREV CH | SPEED |
|
| TRACKING |
– and + (SLOW)
Used for
+to increase the speed. Press – to decrease the speed.
CHAN (Channel) Up or Down
Selects the next higher or lower channel in the VCRÕs channel memory.
CLEAR
Resets the time counter to 0:00:00.
Lets you change entries when setting the clock or a timer recording.
DISP (Display)
Shows VCR operating displays on the TV screen.
Displays the time counter.
FF(Fast Forward)
Fast forwards the tape when the VCR is stopped.
Quickly searches a tape in forward motion during playback.
INPUT
Turns the line input (L) on or off.
Line input refers to the signal coming from the component connected to the audio/video jacks on the back of the VCR.
MENU
Displays the VCR MAIN MENU on the TV screen.
Removes a menu from the screen.
Numbers (0 through 9)
Select a channel up to 99Ñpress two numbers.
Select a cable channel over 99Ñpress and hold 1 until
PAUSE
Pauses action for viewing during playback.
Pauses recording to prevent recording of unwanted scenes.
PLAY
Plays a tape.
POWER
Turns off the VCR when the remote is set to control the VCR.
Turns off other components if remote is programmed.
PREV CH (Previous Channel)
Switches between two channels.
Select one channel and then select another. Press PREV CH to switch between the two channels.
12
