References
Location of Controls
Front Panel
Tape Compartment
POWER STOP•EJECT | CHANNEL | RECORD | REW PLAY•PAUSE FWD |
| TV•VCR | VCR |
|
A
M
TRACKING 
Remote Sensor
CHANNEL or TRACKING up or down
Selects next higher or lower channel in the VCRÕs channel memory.
Adjusts tracking during playback.
FWD (Fast-Forward)
Searches the picture forward during playback.
PLAY•PAUSE
Plays a tape.
Pauses the tape for
Pauses the tape during recording to prevent recording unwanted material.
RECORD
Starts the VCR recording.
Used for one touch recording.
Remote Sensor
Receives signals from the remote control.
Aim the remote at this sensor with no objects between them.
REW (Rewind)
Rewinds the tape when the VCR is stopped.
Searches the picture in reverse during playback.
STOP•EJECT
Stops the VCRÕs normal functions such as record, playback, rewind,
POWER | Ejects the cassette when the VCR is stopped. |
Turns the VCR on or off.
TV•VCR
Switches the picture signal so that it either comes from the VCR or the TV channel.
Back Panel
R |
| IN FROM |
|
| |
AUDIO1 |
| ANT. |
L |
| VHF/UHF |
OUT | IN | OUT TO TV |
| ||
|
| 3 CH. 4 |
VIDEO1 |
|
|
3CH.4 Switch
Selects the channel to which you tune the TV to see the VCR picture if you connect the VCR using one of the basic hookups.
IN FROM ANT. (Antenna) Connector
Receives a signal from an antenna or cable system when attached.
OUT TO TV Connector
Passes signal to TV using the cable supplied.
VIDEO1 IN and AUDIO1 IN Jacks
Receives signals from another component like a VCR or camcorder when it is connected to these jacks. Use INPUT (channel 00) on the remote to select.
VIDEO1 OUT and AUDIO1 OUT Jacks
Sends signals from VCR to another component like a TV, VCR, or camcorder when it is connected to these jacks.
33
