References
Trouble Checks
Trouble |
| Here's what to try: | ||
|
|
|
| |
Timer recording not made | ¥ | Cable box was not turned on at time recording was to begin. | ||
or wrong program recorded | ¥ | Program entered incorrectly (wrong channel or times). | ||
| ¥ | Power interruption. Reset clock. See page 10. | ||
| ¥ | Check to see if time and date are correct Ñ including AM/PM. | ||
| ¥ | Program exceeded tapeÕs length or tape was not rewound beforehand. | ||
| ¥ | VCR was not turned off at the time recording was to start. | ||
| ¥ | No tape in VCR or cassetteÕs safety tab broken off. | ||
|
|
|
|
|
Incorrect time or date | ¥ | Clock was not set accurately (check AM/PM and date). See page 10. | ||
|
|
|
| |
Time did not adjust for daylight savings | ¥ | Check if AUTO DST is turned on. | ||
|
|
|
|
|
VCR makes noise when stopped | ¥ | VCR is removing tape from heads. This is normal. The head cylinder inside | ||
|
| the VCR continues to rotate for a few minutes after you put the VCR in the | ||
|
| stop mode. | ||
|
|
| ||
Will not Auto Channel Search correctly | ¥ | Check antenna connections. | ||
| ¥ | Check SIGNAL TYPE: CABLE/ANTENNA feature. See page 8. | ||
|
|
|
| |
Cannot select channels over 69 | ¥ | Cable channels over 69 can only be selected if SIGNAL TYPE: | ||
|
| CABLE/ANTENNA feature is set to CABLE. Details are on page 8. | ||
|
|
|
| |
Cassette with safety tab removed does not start to | ¥ | Set AUTO PLAY ON/OFF feature to ON. Details are on page 14. | ||
play automatically |
|
|
|
|
|
|
|
| |
Tape plays back in slow motion | ¥ | Press PLAY to return to normal playback. | ||
|
|
|
| |
TIMER indicator flashes | ¥ | Clock was not set. See page 10. | ||
| ¥ | Timer recording programmed and no cassette in VCR. | ||
|
|
|
| |
| ¥ | Check LANGUAGE feature. See page 9. | ||
Spanish. |
|
|
|
|
Time counter disappears while searching
¥This is normal. Details are on page 15.
27
