Connections & Setup
TV
TV (back panel)
VIDEO |
| AUDIO | |
R | L / MONO | ||
| |||
|
| IN | |
|
| L |
OUT
CABLE/
ANTENNA
1
VCR
VCR
|
|
| ANT. IN |
|
AUDIO |
|
|
| 2 |
OUT IN | 3 | 4 | RF OUT | |
| CH |
|
|
VIDEO
From Cable or Antenna
TV + VCR
Note: Your television back panel may not look exactly like the model shown here.
1.Connect the VCR to the TV
Connect one end of the supplied RF coaxial cable to the RF OUT jack on the back of the VCR and the other end to the TV’s Antenna IN jack.
2.Connect the antenna/cable feed to the VCR
Connect the cable or antenna RF coaxial cable to the ANT. IN jack on your VCR.
Note: Flip the CH 3/4 switch on the back of the VCR to the channel that is not used in your area. This will be the channel that the TV must be tuned to in order to see the VCR’s picture.
Go To Page 11
8 | Chapter 1 |
