RCA VR725HF manual Controlling a Cable Box or an RCA DSS Receiver, Program the remote

Controlling a Cable Box or an RCA DSS ® Receiver*

The CABLE button on the VCR's remote is preprogrammed to control either a compatible

RCA cable box or satellite receiver. If your cable box is another manufacturer's brand and has its own remote, you will probably be able to program the VCR's remote to control your

cable box. To program the VCR's remote, enter the code that corresponds to your brand.

Program the remote

1.Turn on the cable box.

2, Point the VCR remote at the cable box.

3. Hold the GABLE button and

press two number buttons to enter the code for your brand,

4.Release the buttons.

5.Press POWER on the remote. If the cable box turns off, setup is complete.

6.Repeat steps 2 - 4 with a

different code if the first one does not work.

Brand of	Cable-TV Box or RCA DSS ®		Code		Number(s)
ABC										53,54
Anvision										07,	08
Cablestar											56
Diamond										07,	08
Eagle										07,08
Eastern	International										02
General	Instrument			04, 05, 15, 23, 24, 25, 30, 36
Hamlin								12, 13, 34,48
Hitachi										37,	43
Jerrold		04, 05,	15,	23, 24, 25,			30, 36,		45, 46,47
Macom										37, 43
Magnavox		07,	08,	19, 26, 28,			29,	32, 33, 40,			41
NSC											09
Oak									01,	16, 38
Oak Sigma											16
Panasonic									03, 27,		39
Philips		07,	08,	19,	26,	28,	29,	32,	33,	40,	41
Pioneer									18, 20,		44
Randtek										07,	08
RCA										60, 27
RCA DSS ®											00
Regal										12,	13
Regency										02, 33
Samsung											44
Scientific	Atlanta								03,	22, 35
Stargete2000											58
Sylvania										11, 59
Teknika											06
Texscan									10, ll,		59
Tocom							17, 21, 49, 50, 55
Unika									31,	32, 41
Universal										51, 52
Viewstar		07, 08,		19, 26,		28,	29, 32, 33,			40, 41
Warner	Amex										44
Zenith									14, 42,		57

* The remote may not be able to control every cable box of the brands listed.

Operate the Cable Box or Satellite Receiver

After you set up your remote (if required) to control your cable box, test the buttons to see which ones operate your cable box or satellite receiver.

1.Point the remote at the cable box or satellite receiver and press CABLE,

2.If the cable box or receiver does not turn on in step 1, press CABLE, then POWER.

3.Use the "Cable Box or RCA Digital Satellite Receiver Function Buttons" for the cable box

and test the "TV Function Buttons" to see which ones operate the satellite receiver. See page 15.

*DSS ® is a registered trademark of DIRECTV, Inc., a unit of GM Hughes Electronics.

18