![](/images/new-backgrounds/1190001/190001217x1.webp)
Error information
Error information
Error messages | Cause and corresponding | |
|
| |
| Error when the communication is executed. The parameter setting (host | |
Set up the parameter. | name, capture port) has not been set. | |
| ➔ Check parameter setting (+p.90) | |
|
| |
It has not been registered to PJ as a | Error when Start Communication or Start real time capture is executed. The | |
IP address of the computer has not been registered. | ||
group. | ||
➔ Register the IP address by using the web browser (+p.97) | ||
| ||
|
| |
Cannot be displayed as PJ is under | Error when Start Communication or Start real time capture is executed. The | |
other capture, viewer or memory viewer function is now operating. | ||
display. | ||
➔ Wait until the communication function is available. | ||
| ||
|
| |
| Cannot establish the connection with the projector when the Start | |
Cannot connect to PJ. | communication is executed, Terminate Communication, Capture transfer, | |
Start real time capture or Terminate capture. | ||
| ||
| ➔ Check connection of the network cable. | |
|
| |
| Cannot transfer the data to the projector when the Start Communication, | |
Cannot transfer data to PJ. | Terminate Communication, Capture transfer, Start real time capture or | |
Terminate capture is executed. The | ||
| ||
| ➔ Check the connection of the network cable. | |
|
| |
| Cannot receive the data from the projector when the Start | |
| Communication, Terminate Communication, Capture transfer, Start real | |
Cannot receive data from PJ. | time capture or Terminate capture is executed. The | |
| seconds. | |
| ➔ Check the connection of the network cable. | |
|
| |
Other PC has authority. | When executing the Terminate Communication, you cannot quit the | |
Cannot complete "Network | ||
communication because other computer has an authority | ||
Communication". | ||
| ||
|
| |
Other PC has authority. Cannot | Other computer has an authority. | |
obtain authority. | ||
| ||
|
| |
Invalid port number | When the parameter is set, the reserved port number is specified. | |
➔ Check the parameter setting (+p.90) | ||
| ||
|
| |
PJ has not started Network | The projector might have turned off during the communication. | |
Communication. Close the window | ||
➔ Check the projector power and | ||
and open it again. |
| |
|
|