Sanyo 1AV4U19B25500 Display menu, Button, Sets Auto PC Adjustment mode, Sets Auto Keystone mode

Chapter 7 Controlling the projector

		Item	Description
		Language	Sets the language display of projector's on-screen
			display menu.
		Auto setup	Executes the Auto PC Adj, and Input Search function
			below according to the each setting after clicking Start
			button.
		Auto PC adj	Sets Auto PC Adjustment mode.
		Input search	Sets the auto-input signal detection mode.
		Auto keystone....	Sets Auto Keystone mode.
		Background	Sets the screen background when no signal input.
		Item	Description
		Display	Switches on or off the on-screen menu display on the
			screen.
			Countdown off..... Displays image during the starting up.
		Logo	Sets the logo display on the screen during the startup.
		Ceiling	Sets the image top/bottom and left/right reversed.
		Rear	Sets the image left/right reversed.
		HDMI setup	Sets the input signal form of HDMI input.
		Image	Sets the Digital R/G/B image level of HDMI.
		Sound	Sets the audio input when using HDMI.
		Item	Description
		Terminal	Sets the terminal of "COMPUTER IN 2/MONITOR OUT".
		Pointer	Sets the pointer form.
		Picture in Picture....	Sets the Picture in Picture mode and set the sub picture
			size and position.
		Mode	Sets the Picture in Picture mode.
		Subpicture size...	Sets the sub picture size.
		Subpicture position...	Sets the sub picture position.
	Item		Description
	Power
	management		Sets into the selected power management mode if the
			input signal is interrupted and no control key is pressed
			for the specified period of time.
			*The specified time can be set 1 to 30 min.
	On start		Sets the power-on mode when the AC cord is
			connected to the outlet.
	Standby mode		Sets the network function enable or disable in the
			standby mode.
			Normal	Enable
			Eco	Disable
	Lamp control		Selects the lamp control mode.
74	Remote control		Sets the remote control code.