Chapter 3 Names and functions of the operating screen
tStart communication button
Enter the Communication mode, and then , the capture edit window starts. The selected projector shows the capture edit window.
yPlay Movie files button
The play movie files window will appear.
uStart real time capture button
Capture (Project) the computer screen in real time. After the execution of "Start real time capture", the application window disappears. • • • v
iOne-shot capture button
Copy and capture (project) the computer screen without modification. After the execution of One- shot capture, the application window disappears. • • • v
oTerminate capture button
Terminate the real time capture and the
!0Select capturing object button
It is possible to designate the window to capture individually. This button is disabled by default, so the full screen is captured. It is possible to change the capturing object function setting at parameter settings. For detail, refer to "Parameter set up" (p.90).
!1Moderator registration button Register a computer user as a moderator.
!2Join moderator's group button
Join the moderator's group which is selected in the Network Projector list. It is not available if there is no moderator registered.
!3Parameter setup button
Activate the parameter setup window, and execute the connections setting, the image setting, and the moderator's function setting. For detail, refer to "Parameter set up" (p.90).
!4Volume adjust slider and Mute check box
Adjust the audio output from the real time capturing computer. The mute check box is checked by default.
vTo show the application window again, refer to the item "Commands on the task bar" (p.89).
Note on Windows Vista
When you use the Network Capture 5 software with Windows Vista, the warning dialog "User account control" will appear. In that case, click Allow button to use it.
Using the multiple network adaptors
When your computer provides multiple network adaptors, the network adaptor selecting window will appear each time the Network Capture 5 software starts. Select a network adaptor and check the "Set network adaptor as default" and then click OK. To change the setting, refer to the item "Parameter set up" (p.90).
26
