Sanyo 1AV4U19B25500 owner manual Date and time setting, Auto setting, Manual setting

Chapter 6 Basic setting and operation

Item	Description
NTP address	Enter the address of NTP server. Please consult your
	network administrator for setting up of the NTP server.
Time zone	Sets your country or region's time zone
Temperature	Switches display temperature unit Centigrade or
	Fahrenheit
Time setting	When clicking AUTO button, the date and time set on
	your computer are set to the projector. The timer icon
	appears when time is set up correctly.
Current time	Indicates current date and time set on the projector
Date	Sets date in manual
Time	Sets time in manual

Date and time setting

NTP is abbreviated expressions of Network Time Protocol. It is a protocol to acquire the exact current time via the network. This projector acquires the current time from the NTP server and update the time in the network module. After setting the NTP address, the projector acquires the time per 24 hours. If the projector fails acquiring the time from the NTP server, the projector tries to acquire the time every 1 hour until it succeeds.

✐"Time zone" is the local time as an offset from Greenwich Mean Time (GMT). "Time zone" is in ± hour:minute format and is available from -23:59 to +23:59.

ex. Time zone: +09:00 in Tokyo, Japan

✐Both of "NTP address" and "Time zone" should be set, otherwise the setting will be failed.

52

When the NTP address is not set, perform the time setting with "Auto-setting" or "manual setting" described below.

Auto setting

Click AUTO button on the page, the date and time set on your computer are set to the projector.

Note: Confirm that your computer has a correct clock time before performing the auto time setting.

Manual setting

Click the item Date or Time and enter the date or time on the input box with adequate format.

Date is in year/month/day format. ex. 2007/10/05

Time is in 24-hour:minute format. ex. 18:30

This projector does not provide the built-in battery. The date and time information are lost when the projector turns off ( when "Eco" is set for the stand-by mode (Refer to p.74)), or the network configuration is reset. The timer function is disable until time is set up correctly. When using the NTP address for time setting, the current time is acquired at the projector starting up and the timer function is activated after finishing the time setting correctly.