Sharp TINSE2026QSZZ operation manual Touch the Administrator Settings key, Example

USING THE ADMINISTRATOR SETTINGS

When using the administrator settings for the first time, change the factory default administrator password to a

Note new code. (Step 3 to step 5)

1 Press the [SYSTEM SETTINGS] key.

DATA

LINE

DATA

OB STATUS SYSTEM SETTINGS

2 Touch the [ADMINISTRATOR SETTINGS] key.

SYSTEM SETTINGS
					EXIT
	TOTAL COUNT	DISPLAY	LIST PRINT	CLOCK
		CONTRAST
	TRAY SETTINGS	ADDRESS	RECEIVE MODE	FAX DATA
		CONTROL		FORWARD

KEYBOARD	ADMINISTRATOR SETTINGS
SELECT

3 Use the numeric keys to enter the five-digit administrator password.

Each time a digit is entered, the dash (-) that

ADMINISTRATOR PASSWORD indicates the digit will change to an asterisk ().

The factory default setting for the administrator password is 00000.

4 Touch a key to select the desired category of administrator settings.

SYSTEM SETTINGS
					EXIT
	ACCOUNT	ENERGY SAVE	OPERATION	DEVICE CONTROL
	CONTROL		SETTINGS
	COPY SETTINGS	PRINT SETTINGS	SCANNER	FAX SETTINGS
			SETTINGS
	LIST PRINT	CHANGE ADMINISTRATOR	PRODUCT KEY
		PASSWORD

Example:

To change the administrator password, touch the [CHANGE ADMINISTRATOR PASSWORD] key.

•Each time you need to configure a program, use this procedure to select the program.

•In the following steps, the setting screen for the selected program appears. Refer to the explanation of the program to select the desired setting (the explanations of the programs begin on page 103).

5 Use the numeric keys to enter the new

5-digit administrator password.

		Use a number for the
		administrator password
		that has not been
		programmed as an
00000	-----
		account number for
		auditing mode (a number
		that has been
		programmed as an

account number cannot be used). The entered number will be the new administrator password. Be sure to remember this number.

6 Touch the [OK] key. You will return to the screen of step 4.

This completes the procedure for changing

OK the administrator password. If you wish to configure another program, touch the key of the desired program in the screen of step 4.

7 Press the [CLEAR ALL] key () to exit the setting.

6

97