Sharp TINSE2026QSZZ operation manual Reduction/Enlargement/Zoom, Automatic Ratio Selection

REDUCTION/ENLARGEMENT/ZOOM

There are three ways to enlarge and reduce copies:

● Automatic ratio selection according to the paper size ........................... AUTOMATIC RATIO SELECTION (below)

● Specifying a ratio with the reduce key, enlarge key, or zoom key ..................MANUAL RATIO SELECTION (p.32)

● Separately selecting vertical and horizontal ratios ........................................................... XY ZOOM copying (p.33)

Ratios that can be selected vary depending on the following conditions:

Original position	Selectable ratios
Document glass	25 to 400%
RSPF	50 to 200%

AUTOMATIC RATIO SELECTION
The ratio is automatically selected based on the original size and paper size.						2
1	Place the original(s). (p.23, p.24)			•	When automatic ratio selection is
			Note		selected, the [AUTO IMAGE] key is
	The original size appears in the touch panel.				highlighted in the main screen.
				•	If the original and paper are in different
	•	If the original size does not appear in the			orientations, the image is automatically
					rotated to match the paper orientation (for
	Note	touch panel, specify the original size
		manually. (p.48)			paper sizes 8-1/2" x 11" (A4) or less).
				• Rotation of the image can be disabled in the
	•	Automatic ratio selection is not possible if
					administrator settings. (See "6. SYSTEM
		the original or paper is a non-standard

	size.	SETTINGS (ADMINISTRATOR)".)
		• If "IMAGE IS LARGER THAN THE COPY
		PAPER." appears in the touch panel, part
2	Touch the [PAPER SELECT] key and	of the image will be cut off in the copy.

then select the desired paper size.

The selected key is

8½x11 PLAIN highlighted and the paper selection screen closes.

8½x14 RECYCLE

4 Select the number of copies and any other desired settings, and then press the [START] key ( ).

If paper of the desired size is not loaded in Note any of the trays, load paper of the required

size in a paper tray or in the bypass tray. (p.19)

3 Touch the [AUTO IMAGE] key.

A suitable ratio is selected based on the original size and selected paper size. (The ratio appears in the touch panel.)

LOGOUT

UT

To cancel automatic ratio selection, touch Note the [AUTO IMAGE] key. Automatic ratio

selection also turns off automatically when the enlargement key, the reduction key, or a

[ZOOM] key ( / ) is touched to allow the ratio to be selected.

31