Sharp TINSE2026QSZZ operation manual Copy ratio in the vertical Y direction, Touch the Y key

COPY FUNCTIONS

4 Touch the [X] key.

7 Use the reduction, enlargement, and [ZOOM] keys ( / ) to change the

X 100

1

The [X] key is selected (highlighted) by default, so there is normally no

copy ratio in the vertical (Y) direction.

	A fixed ratio key will not
77%	become highlighted

Y 100 2

ZOOM

4

need to perform this step (Go to step 5.).

If the [X] key is not highlighted, perform this step.

	X	when touched.
64%	Y
50%

5 Use the reduction, enlargement, and [ZOOM] keys ( / ) to change the copy ratio in the horizontal (X) direction.

		A fixed ratio key will not
		become highlighted
64%	Y

when touched.

50%

XY ZOOM

X	50	If you need to readjust
		the horizontal ratio, touch
Y	70
		the [X] key again.

ZOOM

ZOOMCANCEL

8 Touch the [OK] key.

129% OK

E

4%

0%

XY ZOOM

Y100

ZOOM

CANCEL

The [ZOOM] keys

( / ) can be used to change the ratio in increments of 1%

Touch the key to increase the ratio, or the

key to decrease the ratio. Continuing to touch

a[ZOOM] key ( / ) makes the ratio change faster.

200%

100%

PAP

400%

9 Make sure that a suitable paper size is automatically selected, or select another size using the [PAPER SELECT] key.

Note

Touch a reduction or enlargement key to set

the approximate ratio, then touch the [ ]

key to decrease the ratio or the [ ] key to increase the ratio.

	If AUTO PAPER
EXPOSURE
	SELECT is enabled, the
	appropriate copy paper
AUTO 8½x11
	size is automatically
PAPER SELECT
	selected based on the
	original size and selected
X-50% Y-70%	copy ratios.

6 Touch the [Y] key.

X50

Y100

ZOOM

10 Select the number of copies and any other desired copy settings, and then press the [START] key ( ).

Note To cancel this function, touch the [CANCEL]

key in the XY ZOOM screen.

34