Sharp TINSE2026QSZZ operation manual 152, Exposure Limit Values             

	MATERIAL SAFETY DATA SHEET				Page : 3/4
				Date Issued	: Jun. 1, 2009
				MSDS No	F-31791
8.EXPOSURE CONTROLS / PERSONAL PROTECTION
Engineering Measures
Ventilation		: Not required under intended use.
Exposure Limit Values             
OSHA-PEL(USA)		: 15mg/m3 (Total Dust)	, 5mg/m3 (Respirable Dust)
ACGIH-TLV(USA)		: 10mg/m3 (Total Dust)	,3mg/m3 (Respirable Dust)
Personal Protective Equipment
Respiratory Protection		: Not required when used as intended in Sharp equipment.
Hand Protection		: Not required when used as intended in Sharp equipment.
Eye Protection		: Not required when used as intended in Sharp equipment.
Skin Protection		: Not required when used as intended in Sharp equipment.
Other Protective Equipment		: Use of a dust mask and goggles are recommended when handling a large
		quantity of toner or during long term exposure, as with any non-toxic dust.
9.PHYSICAL AND CHEMICAL PROPERTIES
Appearance
Physical State : Solid		Form : Powder	Color : Black	Odor : odorless
Ph		: Not applicable
Boiling / Melting Point		: Not applicable
Flash Point(°C)		: Not applicable
lgnition Point(°C )		: No data
Explosion Properties		: No data
Density(g/cm³)		: Approx.5.0 (bulk density : Approx. 2.0)
Solubility in Water		: Negligible
10.STABILITY AND REACTIVITY
Stability		: Stable
Hazardous Reactions		: Dust explosion, like most finely divided organic powders.
Conditions to Avoid		: Electric discharge, throwing into fire.
Materials to Avoid		: Oxidizing Materials
Hazardous Decomposition Products : CO, CO2 and NOX
Further Information		: None
11.TOXICOLOGICAL INFORMATION
Acute Toxicity	: LD50 > 2000mg/kg (Rats) [Estimated from the other product containing similar material]
Ingestion(oral)
Inhalation	: No Data
Eye irritation	: No Data
Skin irritation	: Not an irritant	[Estimated from the other product containing similar material]
Skin sensitizer	: No sensitization [Estimated from the other product containing similar material]
Mutagenicity	: Negative (Ames Test) [Estimated from the other product containing similar material]
Carcinogenicity	: In 1996 the IARC reevaluated carbon black as a Group 2B carcinogen (possible human
	carcinogen). This classification is given to chemicals for which there is inadequate human

evidence, but sufficient animal evidence on which to base an opinion of carcinogenicity. The classification is based upon the development of lung tumors in rats receiving chronic inhalation exposures to free carbon black at levels that induce particle overload of the lung. Studies performed in animal models other than rats did not show any association between carbon black and lung tumors. Moreover, a two-year cancer bioassay using a typical toner preparation , where carbon black is bound in a resin matrix, demonstrated no association between toner exposure and tumor development in rats.

152