Sharp TINSE2026QSZZ Staple Sort, Orientation of the Original and Stapling Positions

CONVENIENT COPY FUNCTIONS

STAPLE SORT

(when the finisher (MX-FN13) is installed)

This function collates the copies, staples each set, and delivers the sets to the offset tray. The staple sort function can only be used when a finisher is installed.

Stapling position	Portrait orientation		Landscape orientation
Top left corner		Available paper sizes:		Available paper sizes:
		8-1/2" x 11" (A4, B5)		11" x 17", 8-1/2" x 14",
		Stapling capacity:		8-1/2" x 13", 8-1/2" x 11" R
		For each size, up to 50 sheets		(A3, B4, A4R, B5R)
		can be stapled.		Stapling capacity:
				11" x 17", 8-1/2" x 14",
				8-1/2" x 13" (A3, B4)
				For each size, up to 30 sheets
				can be stapled.
				8-1/2" x 11"R, (A4R, B5R)
				For each size, up to 50 sheets
				can be stapled.

ORIENTATION OF THE ORIGINAL AND STAPLING POSITIONS

Using the RSPF	Using the document glass
Insert the originals face up.	Place each original face down.
Stapling position	Stapling position

When copying 8-1/2" x 14" or 11" x 17" (B4 or A3) vertically oriented originals, the copies will be stapled at the position shown below.

Stapling position

Stapling position

Document glass

RSPF

•	When using letterhead paper in the staple sort, load the paper with the letterhead to
Note	the front or to the right as shown in the diagram.

SHARP

SHARP

•When the staple sort is used, the automatic original image rotation function does not operate.

•Different sized originals cannot be copied on the corresponding sizes of paper.

•The staple sort function cannot be used if disabled in the administrator settings. (See "6. SYSTEM SETTINGS (ADMINISTRATOR).)

•The offset function (p.36) cannot be used.

38